Hypertherm Powermax 45 Plasma Torch

Cutting Specifications: Production pierce = 3/8" • Edgecut severance = 1/2"

Requirements:
A clean dry non-fluctuating 90psi Compressed air or Nitrogen (required for Aluminum and Stainless steel cutting applications) source.

Input Voltage:
200-240V, 1-PH, 50/60Hz, CSA
230V,1-PH, 50/60Hz, CE
400V, 3-PH, 50/60Hz, CE

Input Current:
200-240V, 1-PH: 30Amps
230V, 1-PH: 30Amps
400V, 3-PH: 10Amps

Flow Rate and Pressure: 360scfh @ 90psi
Duty Cycle: 50%

Download Powermax 45 Brochure

Hypertherm Powermax 65 Plasma Torch

Cutting Specifications: Production pierce = 1/2 " • Edgecut severance = 1-1/4"

Requirements:
A clean dry non-fluctuating 90psi Compressed air or Nitrogen (required for Aluminum and Stainless steel cutting applications) source.

Input Voltage:
200-600V, 1/3-PH, 50/60Hz, CSA
230-400V, 3-PH, 50/60Hz, CE

Input Current:
200/208/240/480V, @ 9kW output
1-PH: 52/50/44/22Amps

200/208/240/480/600V @ 9kW output
3-PH: 32/31/26/27/13/13Amps

Flow Rate and Pressure: 400scfh 6.7cfm @ 85psi
Duty Cycle:
50% @ 65Amps, 230-600V, 1/3-PH
40% @ 65Amps, 200-208V, 1/3-PH
100% @ 46Amps, 230-600V, 1/3-PH

Download Powermax 65 Brochure

Hypertherm Powermax 85 Plasma Torch

Cutting Specifications: Production pierce = 5/8" • Edgecut severance = 1-1/2"

Requirements:
A clean dry non-fluctuating 90psi Compressed air or Nitrogen (required for Aluminum and Stainless steel cutting applications) source.

Input Voltage:
200-480V, 1-PH, 50/60Hz, CSA
200-600V, 3-PH, 50/60Hz, CSA

Input Current:
200/208/240/480V @ 12.2kW Output
1-PH: 70/68/58/29Amps
200/208/240/480/600V @ 12.2kW Output
3-PH: 42/40/35/18/17Amps

Flow Rate and Pressure: 400scfh 6.7cfm @ 85psi
Duty Cycle:
60%, @ 85Amps, 230-600V, 3-PH
60%, @ 85Amps, 480V, 1-PH
50%, @ 85Amps, 240-600V, 1-PH
50%, @ 85Amps, 200-208V, 3-PH
40%, @ 85Amps, 200-208V, 1-PH
100% @ 66Amps, 230-600V, 1/3-PH
100% @ 46Amps, 230-600V, 1/3-PH

Hypertherm Powermax 1650 Plasma Torch

Cutting Specifications: Production pierce = 3/4 " • Edgecut severance = 1-1/4"

Estimated Operating Costs:
1/2" Steel = $0.63 per linear foot
1/4" Steel = $0.25 per linear foot
18ga Steel = $0.12 per linear foot

Requirements:
A clean dry non-fluctuating 90psi Compressed air or Nitrogen (required for Aluminum and Stainless steel cutting applications) source.

Input Voltage:
200-600V, 3-PH, 50/60Hz, CSA
230V-400V, 3-PH, 50/60Hz, CE

Input Current:
200/208/230/240/400/480/600V,
3-PH: 53/51/46/44/27/22/21Amps

Flow Rate and Pressure: 550scfh @ 75psi
Duty Cycle:
80%, 400-600V, 3-PH
70%, 230-240V, 3-PH
60%, 200-208V, 3-PH

Download Powermax 1650 Brochure