Techno CNC Router Systems

 User Friendly CNC Router Features | HD Series CNC Routers

HD CNC router specifications

   DOWNOAD HD CNC Router Specs
   HD Top View  —  HD Side Views
   Back to HD CNC Router Main Page

  • 4HP HSD High Frequency Collet Spindle
  • Automatic tool calibration
  • Extremely heavy-duty, all steel construction
  • Maintenance free Brushless micro-stepper motors
  • CNC vacuum table system | CNC Vacuum Pump
  • Precision ball screw drive on Z-Axis
  • Drive Train Assembly
  • User-friendly CNC router hand held controller
  • Electronics and Control Panel
  • Techno User Friendly CNC Router Hand Held Controller HD Series CNC Routers

    Techno CNC Router Hand Held Controller

    1. The hand-held controller is the heart of the operational system!
    2. This hand-held controller redefines the phrase “easy-to-use”.
    CNC tool calibration is easy with CNC Hand Held Controller by Techno
    Customers can be up and running the same day power is connected to the machine. Every controller has very easy-to-read, -understand, and -execute commands. The setup introduction manual provides information that will have users cutting parts in minutes.

    Techno HD Series CNC Router 4HP HSD High Frequency Collet Spindle comes complete with vacuum hood, hose support system and wrenches

    4HP HSD High Frequency Collet Spindle

    The HD Series machine comes standard with a 4HP HSD high frequency collet spindle. These precision spindles require no maintenance, use industry standard ER collets, fully programmable speeds from 6000 to 18000 RPM, and comes complete with vacuum hood / hose support system and wrenches.

    Back to Top
    HD Series CNC Router Base Frame

    Base Frame

    The base frame is fabricated from heavy-duty tubular steel that is welded, precision machined and stress relieved so that the foundation remains true and steady over the operational life of the machine.

    Back to Top
    Techno HD CNC Router Gantry with dust collection system

    Gantry

    The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.

    Back to Top
    HD series CNC Router Gantry Support (Uprights)

    Gantry Support (Uprights)

    The Gantry uprights are cast iron with heavy duty gussets formed into the casting. Each support is machined for housing the various drive assemblies including motors, bearings, belts, and wiring harnesses.

    Back to Top
    HD Drive Train Assembly

    Drive Train Assembly

    The Techno HD Series CNC Router uses precision helical gear racks on the X and Y axes. The mounting of the rack is inverted to help keep dust and debris from building up on the drive system, this assures smooth motion and long term reliability.

    The precision gearbox is directly coupled to the stepper motor and pinion. This eliminates belt stretch inaccuracies assuring high-speed machining while the system positions the spindle accurately.

    Back to Top
    HD Series CNC Router Drive Motors

    Drive Motors

    The Techno HD Series CNC Router utilizes brushless microstepper motors. These motors require no regular maintenance — therefore, reducing any maintenance downtime!

    Back to Top
    — Back to Top —  Back to HD Series CNC Router Main Page — 
    HD Series CNC Router Tool Calibration

    Automatic Tool Calibration

    Automatic tool calibration pad allows for easy and accurate “Z” zero position for single and multiple tool changes through the program.

    Back to Top
    HD Series CNC Router Tool Calibration

    Control Panel Functions

    The main functionality for the HD Series is accessible on the Front Panel of the Enclosure. Your tools can be placed right on top and the Hand-Held Controller conveniently hangs on the side.

    • Main Power Switch
    • Emergency Stop
    • Power Enable
    • Power Disable
    • Spindle Inverter Readout
    • Vacuum Controls
    • USB Port
    Back to Top

    Techno’s HD CNC Router gives you freedom never offered before. We guarantee customers will be cutting parts the same day power is connected.

    HD Series CNC Router Electrical Enclosure

    HD Series CNC Routers Electronics

    All the electrical components are housed and wired in a doubled-doored Nema 4 electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easiliy navigate the cabinet. In addition, the cabinet serves as a work bench for the tools required.

    Back to Top
    Back to Top
    The top view of the Techno HD 5 ft. x 12 ft. CNC router is shown in the photo above. See the multi-zoned vacuum plenum table surface with the T-slot profile. The vacuum table zones can be turned off easily via control valves on the front of the machine.
    The top view of the Techno HD 5 ft. x 12 ft. CNC router is shown in the photo above. See the multi-zoned vacuum plenum table surface with the T-slot profile. The vacuum table zones can be turned off easily via control valves on the front of the machine.
    Side view
    A side view of the Techno Model HD 60145 CNC Router with the electronics enclosure is shown in the photo above with the dust collection hose in place on the machine.
    A side view of the Techno Model HD 60145 CNC Router with the electronics enclosure is shown in the photo above with the dust collection hose in place on the machine.
    Side angle view
    A side angle view of the Techno HD 5 x 12 CNC router is shown in the photo above. Each axis includes (4) linear bearings. These rails mount to precision machined steel surfaces of the machine's drive axis. It's this material makeup, and precision guides, that deliver quality, safe, precision motion to the machine high speed spindle / cutting tool.
    A side angle view of the Techno HD 5 x 12 CNC router is shown in the photo above. Each axis includes (4) linear bearings. These rails mount to precision machined steel surfaces of the machine's drive axis. It’s this material makeup, and precision guides, that deliver quality, safe, precision motion to the machine high speed spindle / cutting tool.
    Back to Top

      HD CNC Router Vacuum Table System

    Techno CNC router vacuum table - vacuum hold down

    HD Series CNC Routers Vacuum Table and T-Slot Profile

    The HD CNC Router has a 1 inch thick phenolic vacuum table surface mounted onto the steel base frame, keeping a rigid and consistent platform for your sheets and parts to be supported.

    The vacuum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles.

    The HD Series Machine also includes a heavy-duty aluminum T-Slot profile in multiple locations across the table surface. This T-Slot accepts Techno’s square M6 T-nuts.

    Single Becker Rotary Vacuum Pump

    Vacuum Pumps

    The most commonly asked question, when it comes to vacuum hold down and nested-based manufacturing, is how much vacuum does your application require? Vacuum systems should be evaluated based on the specific application. The smaller the part or thinner the material to be held requires the greater volume of air flow, thus increasing the size of the vacuum pump.

    Back to Top


    Many people state that you can’t have enough vacuum. This is somewhat true, but depending on the application, it can be very costly. It is always easier to overbuy. Purchasing a single 40HP or 50HP pump can cost in excess of $25,000, and this is only the initial cost. What about the utilities? Depending on where your shop is located, these rates can vary considerably. Keep in mind, operating costs rarely go down, so this cost will increase year to year.
    Single Becker Rotary Vacuum Pump
    “At Techno, our vacuum options and designs make our systems a valuable tool in keeping overhead down.”

    There are other options to be considered. Purchasing a number of smaller pumps can help reduce cost. If you are processing sheets of material that have large parts, then a single pump can be utilized. If the nest has numerous smaller parts, then it is best to run all the pumps for maximum air flow. There are other devices which can be purchased to aid the vacuum hold-down system, such as: a spindle pressure foot, or roller hold-down. These devices push down on the material while being routed thus aiding the effectiveness of the vacuum system.

    At Techno, we offer several types of vacuum pumps. The selection is application specific, but most require a pump that is quiet, clean, and requires minimal maintenance. Below are pump models we’ve selected after careful analysis and testing in various materials. Our team of Application Engineers and Sales Staff can aid you with the pump that will meet your production needs.

    Back to Top

    Vacuum Pump Options

    Single Becker Rotary Vacuum Pump

    Single Becker Rotary Vacuum Pump • 9 HP TEFC (totally enclosed fan-cooled)
      Rotary Vane Vacuum Pump

    • Available in 230/460V, 50-60Hz, 3 ph or single phase

    • Comes standard with motor starters, vacuum gauge,
      primary and secondary filters, check valve
      and necessary plumbing to connect to the router

    • Rated for 173 CFM, 25" Hg, 81dB for very quiet operation

    Back to Top
    Twin Pack Of Rotary Vane Vacuum Pumps

    Twin Pack Of Rotary Vane Vacuum Pumps

    • (2) 9 HP TEFC Rotary Vane Vacuum Pumps

    • Available in 230/460V, 50-60Hz, 3 ph

    • Comes standard with motor starters, vacuum gauge,
      primary and secondary filters, check valve
      and necessary plumbing to connect to the router

    • Rated for 346 CFM, 25'' Hg, 81db for very quiet operation

    Back to Top

    7.5 HP Regenerative Vacuum Pump

    7.5 HP Regenerative Vacuum Pump • 7.5 HP Regenerative 2-stage Vacuum Pump

    • Available in 230V, 3-ph, 30 amp circuit

    • Comes standard with motor starters, vacuum gauge,
      primary and secondary filters, check valve
      and necessary plumbing to connect to the router

    • Rated for 75CFM @ 13.2Hg, open flow = 129cfm

    Back to Top

    25 HP Regenerative Vacuum Pump

    25 HP Regenerative Vacuum Pump • 25 HP Regenerative Vacuum Pump

    • Available in 230V, 3-ph

    • Comes standard with motor starters, vacuum gauge,
      primary and secondary filters, check valve
      and necessary plumbing to connect to the router

    • Rated for 350CFM @ 11.1"Hg
       Open flow : 650cfm
       Full load amperage = 62amps


     


    4HP HSD High Frequency Collet Spindle Multi-Zone Vacuum Table Automatic tool calibration pad