Techno CNC Systems

Venture CNC Router Labeled Construction Features
Click to Read Top Ten Reasons Why Your Company Needs A CNC Router
 
Download Venture CNC SpecificationsCNC Financing
See the New Venture Series with complete material handling
See the New Venture Series
ME4 with complete material handling

CNC Router with Rotary Tool Carousel | Techno Venture Series

What are the advantages in having a CNC router with a rotary tool carousel as opposed to a stationary tool rack?

Well, there are quite a few advantages: you now have unobstructed access to the front and rear of the machine for easier material loading and unloading; quicker tool changes which means faster processing of your sheet material. The Techno Venture Series is a great machine if you want to streamline your CNC production process.

Your new Venture CNC Router system comes standard with a 12 HP HSD high frequency automatic tool changer spindle with an 8-tool rotary carousel equipped with a pneumatically retractable vacuum hood, a multi-zone vacuum t-slot table, a 10 HP Becker rotary vane vacuum pump, and a precision helical rack-n-pinion on the X and Y axes with a ballscrew Z axis drive. Linear bearings and rails are used on all three axes providing smooth, play-free movement. You get direct drive precision gear boxes coupled to the high-powered, maintenance free, brushless AC servo motors and pinions. This type of system eliminates belt stretch inaccuracies since there are no pulleys to wear down.

Routing is driven by a PC based Osai industrial CNC controller with an easy to use system interface. All of the electrical components are housed, wired and tagged in a doubled-door Nema enclosure. Your product shop benefits from high speed precision motion, a maintenance free, more efficient CNC cutting system, increased production and profit with the value to expand your CNC router business at later date.

You Get Even More ... Scroll Down to Browse CNC Construction Features

  Pneumatic material placement stops
  Hand-held pulse generator with rotary hand wheel controls the axis selected
  CNC Control Panel Functions
  Automatic CNC tool calibration

CNC Router
Models
CNC Process Area
Gantry
Height
Cut
Speed
Rapid
Speed
CNC Foot Print
X
Y
Z
W
L
H
Venture 4848
50
50
7.5
7.5
1000
1500
98
77
60
Venture 4896
50
97
7.5
7.5
1000
1500
98
131
60
Venture 60120
61
121
7.5
7.5
1000
1500
110
155
60
Venture 60144
61
145
7.5
7.5
1000
1500
110
179
60

Back to TopCNC Tool Rotary Carousel

The use of an 8 Tool Rotary Carousel speeds up tool changes assuring faster cycle times increasing production throughput.

Venture 8 Tool Rotary CarouselBack to Top
CNC Tool Calibration Pad

CNC Tool Calibration

Back to TopAutomatic tool calibration pad allows for easy and accurate ā€œZā€ zero position for single and multiple tool changes through the program.


Spindle

Tool Changer Spindle

Back to Top The Venture Series machine comes standard with a 12HP HSD high frequency automatic tool changer. This precision spindle requires no maintenance, uses industry standard ER collets and ISO 30 tool holders. Fully programmable speeds from 6000 to 24000 RPM, and comes complete with pneumatically retractable vacuum hood.

Gantry

Gantry

Back to TopThe gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.

Gantry Support (Uprights)

Gantry Support (Uprights)

The Gantry uprights are cast iron with heavy duty gussets formed into the casting. Each support is machined for housing the various drive assemblies including motors, bearings, belts, and wiring harnesses.

Base Frame

Back to TopBase Frame

The base frame is fabricated from heavy-duty tubular steel that is welded, precision machined and stress relieved so that the foundation remains true and steady over the operational life of the machine.



Drive Motor

Drive Motors

Back to TopThe Venture Series CNC Router utilizes AC Servo motors powered by Delta Drives. These motors require no regular maintenance ā€” therefore, reducing any maintenance downtime.

THK Bearings and Rails

Drive Train Assembly

The Venture Series uses precision Helical gear racks on the X and Y axes. The mounting of the rack is inverted to help keep dust and debris from building up on the drive system, this assures smooth motion and long term reliability. The precision gearbox is directly coupled to the Servo motor and pinion. This eliminates belt stretch inaccuracies assuring high-speed machining while the system positions the spindle accurately.

 
Pneumatic CNC Material Alignment Stop ClosedPneumatic CNC Material Alignment Stop Open

Pneumatic Material Alignment Stops

Back to TopThe Venture Series CNC machine comes standard with three material pneumatic alignment stops. These pins allow the operator to bank the edge of the material against them precisely aligning the material to the machine origin.



Vacuum Table

Back to TopVacuum Table

The vacuum plenum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles.

Back to TopT-Slot Profile

Venture Series includes a heavy-duty aluminum T-slot profile in multiple locations across the table surface. This T-slot accepts Industry Standard M8 T-nuts.

T-Slot ProfileBack to Top
Vacuum Pump

Back to TopVacuum Pump

  (1) 10HP TEFC (totally enclosed fan-cooled). Rotary Vane Vacuum Pump

  Available in 230/460V, 50-60Hz, 3 ph or single phase
     Comes standard with motor starter, vacuum gauge, primary and secondary filter, check valve and all necessary plumbing to connect to router

  Rated for 173 CFM, 25ā€ Hg, 81dB for very quiet operation



Control Panel Functions

Back to TopCNC Control Panel Functions

The main functionality for the Venture Series is accessible on the front panel of the enclosure. Your tools can be placed right on top and the hand-held pulse generator conveniently hangs on the side.

  Main Power Switch
  Emergency Stop
  Power Enable
  Power Disable
  Spindle Inverter Readout
  Vacuum Controls
  USB Port

Electronics

CNC Controller - the Electronics

Back to TopAll the electrical components are housed and wired in a doubled-doored Nema 4 electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet. In addition, the cabinet serves as a work bench for the tools required.

Hand-held Controller

Hand-held Pulse Generator

Back to TopThe Rotary hand wheel, attached to the machine, will control the axis that is selected on the wheels dial. All other functions are disabled when this is active.

The Setup Introduction manual provides information that will have users cutting parts in minutes.

 
 
Copyright ©  Techno CNC Systems, LLC. All rights reserved.