Techno CNC Systems

Techno CNC Used and Refurbished CNCs for Sale
Techno CNC Routers for Sale - Used and Refurbished CNCs, used 4x4 CNC Plasma Cutter for Sale,
Used 4x8 CNC Routers by shops buying large systems.

Techno LC Series 4896 CNC Router for Sale
Price is $21,500 Mint Condition, FOB Arizona, Sold As Is and Where Is

Used Techno LC Plus Series 4896 ATC CNC Router with Coolant System Price is 21500

Techno LC Plus 4896 ATC CNC Router with Coolant System

Features and Specifications
  • X-Axis Travel = 50.0"
  • Y-Axis Travel = 96.0"
  • Z-Axis Travel = 5.0"
  • System Power requirements = 110V
  • Includes: Tool calibration touch pad.
  • Drive System: Balls Screws on X,Y, and Z axes with anti-backlash ball nuts.
  • Drive System is closed loop DC servo control. Comes complete with servo control card and windows based user friendly software interface.
  • Repeatability: .001 inches
  • Max. speed: 800 in/min
  • Dimensions: L132"xW80"xH70" (Approx 1500lbs)
  • ATC Spindle 5 HP HSD Router Set with (220V, 3-phase) 6000-18000RPM
  • Includes collet wrenches, 1/8", 1/4", 3/8", and 1/2" ER25 collets, and cover nut.
  • 5-Zone Vacuum T-slot Table (No Pump)
  • Micro-Drop Coolant System
  • Includes Computer as shown in photo
Techno LC Series 4896 Used Tool Changer CNC Router Price is $21,500 Mint Condition
Watch Video
Techno Refurbished CNC Routers Techno Used CNCs for Sale

Techno LC Plus 4896 (High Powered Used 4x8 CNC Router)
Price is $18,500


Techno LC Series 4896 Used CNC Router System Price 18500 with less than 500 hours of use


Techno LC Plus 4x8 Used CNC Router System:
Features and Specifications
  • X-Axis Travel = 50.0"
  • Y-Axis Travel = 96.0"
  • Z-Axis Travel = 5.0"
  • System Power requirements = 110V
  • Includes: Tool calibration touch pad.
  • Drive System: Balls Screws on X,Y, and Z axes with anti-backlash ball nuts.
  • Drive System is closed loop DC servo control. Comes complete with servo control card and windows based user friendly software interface.
  • Repeatability: .001 inches
  • Max. speed: 800 in/min
  • Control voltage full load amperage = 6.3amps
  • Dimensions: L132"xW80"xH70" (Approx 1500lbs)
  • Spindle 3 HP HSD Router Set with (220V, 3-phase)6000-18000RPM
  • Includes Vacuum Hood, collet wrenches, 1/8", 1/4", 3/8", and
    1/2" ER25 collets, and cover nut.
  • 5-Zone Vacuum t-slot Table for Model 4896 LC Series
Price 22,500 Techno CNC Router with less than 500 hours of use
Techno Refurbished CNC Routers Techno Used CNCs for Sale

4x4 CNC Plasma Cutter for Sale Price is $15,000.
(If purchased new, CNC Plasma System Price is $27,195)
Techno CNC Demo Used CNC Plasma Cutting System in our shop for 6 months

$15,000 sale price includes 6 Month Warranty and FREE Technical SupportUsed 4x4 CNC Plasma Cutting Table for Sale Hypertherm Plasma System (Demo Model) Used in our shop for 6 months Price is $15,000 includes 6 Month Warranty and FREE Technical Support

     
    Watch Video  

    Model 4848 High Speed 4x4 CNC Plasma Cutting Table (220V, 3PH)
  • X-Axis Travel = 48.0"
  • Y-Axis Travel = 48.0"
  • Z-Axis Travel = 7-1/2"
  • Gantry Clearance = 7-1/2"
  • Distance between uprights = 57"

    Specifications:

  • CNC Plasma height control features automatic CNC torch height control and maintains a constant arc voltage. Includes magnetic torch breakaway with Z-axis auto retract reetract.
  • Table: Steel V-Grid with down draft and water nozzle.
  • Drive system: Precision rack-n-pinion on X / Y, Ball screw on Z-axis.
  • Control System: Micro stepper controller with brushless motors and easy to use hand held control pendant.
  • CNC Control System Power requirements = 220V, 3-phase (See plasma torch specs for required electrical requirements.)
  • Compatibilty: G & M code
  • Position accuracy: +/-.005 inches
  • Max. speed: 800 in/min
  • Approx. weight = 2000lbs

    Brand New Torch: Hypertherm Powermax 65 Plasma Torch System includes:

  • Techno's CNC Plasma real-time torch height control, and Torch mounting accessories.
  • Cutting specifications: Production pierce = 1/2" Edgecut severance = 1-1/4"
    Requirements: A clean dry non-fluctuating 90psi Compressed air or Nitrogen (required for Aluminum and Stainless steel cutting applications) source.
    Input Voltage: 200-600V, 1/3-PH, 50/60Hz, CSA 230-400V, 3-PH, 50/60Hz, CE -Input Current 9 kW: 200/208/240/480V, 1-PH 52/50/44/22 A 200/208/240/480/600V, 3-PH 32/31/27/13/13 A -Flow rate and pressure: 400scfh 6.7cfm @ 85psi -Duty Cycle: 50% @ 65 A, 230-600V, 1/3-ph 40% @ 65 A, 200-208V, 1/3-ph 100% @ 46 A, 230-600V, 1/3-ph
    NOTE: Techno auto CNC torch height control included with the purchase of the Hypertherm torch from Techno. If customer chooses to use their own Hyperthem unit add $2000 for integration and torch height control circuitry and software capability.

    Software

  • EnRoute Fabrication is Plasma Toolpath generator that features a complete set of design and editing tools.
  • In addition, E-Fab includes fonts and graphics package, bitmap vectorization, kerf compensation, quick fit nesting and smart ordering.
Demo 4x4 CNC Plasma Table for Sale Price is $15,000, if purchased new $27,195
Techno Refurbished CNC Routers Techno Used CNCs for Sale

Techno LC Series 4896 Used CNC Router
Price is $14,500

LC Series 4896 Techno 4x8 CNC Router Used Price is 14500 LC Plus Series 4896 Techno CNC Router Used:
Features and Specifications
  • X-Axis Travel = 50.0"
  • Y-Axis Travel = 96.0"
  • Z-Axis Travel = 5.0"
  • System Power requirements = 110V
  • Includes: Tool calibration touch pad.
  • Drive System: Balls Screws on X,Y, and Z axes with anti-backlash ball nuts.
  • Drive System is closed loop DC servo control. Comes complete with servo control card and windows based user friendly software interface.
  • Repeatability: .001 inches
  • Max. speed: 800 in/min
  • Dimensions: L132"xW80"xH70" (Approx 1500lbs)
  • Spindle 3 HP HSD Router Set with (220V, 3-phase)6000-18000RPM
  • Includes collet wrenches, 1/8", 1/4", 3/8", and 1/2" ER25 collets, and cover nut.
Techno Refurbished CNC Routers Techno Used CNCs for Sale

Techno LC Series 4896 CNC Router System
(Use CNC Router with less than 500 hours of use)
Price is $22,500

Techno LC Series 4896 Used CNC Router System Price 22500 with less than 500 hours of use



Price 22,500 Techno CNC Router with less than 500 hours of use
LC Series 4896 Techno CNC Router Used:
Features and Specifications
  • X-Axis Travel = 50.0"
  • Y-Axis Travel = 96.0"
  • Z-Axis Travel = 5.0"
  • System Power requirements = 110V
  • Includes: Tool calibration touch pad.
  • Drive System: Balls Screws on X,Y, and Z axes with anti-backlash ball nuts.
  • Drive System is closed loop DC servo control. Comes complete with servo control card and windows based user friendly software interface.
  • Repeatability: .001 inches
  • Max. speed: 800 in/min
  • Control voltage full load amperage = 6.3amps
  • Dimensions: L132"xW80"xH70" (Approx 1500lbs)
  • Spindle 3 HP HSD Router Set with (220V, 3-phase)6000-18000RPM
  • Includes Vacuum Hood, collet wrenches, 1/8", 1/4", 3/8", and
    1/2" ER25 collets, and cover nut.
  • 5-Zone Vacuum t-slot Table for Model 4896 LC Series
  • Pump 8.8HP (6.6kw) Rotary vane vacuum pump (3-phase)
    Specs: 173 CFM, 25Hg vacuum, 81db
    208-230/460 Volt +/- 10%
    AMPS: 208V-27.4a, 230V-25.4a, 460V-12.7a
    Includes: motor start, coil, and CNC connections
CNC Router price 22500 with less than 500 hours of use
Techno LC Series 4896 CNC Router System ( 4x8 CNC Router with less than 500 hours of use) Price is $22,500
 
Techno Refurbished CNC Routers Techno Used CNCs for Sale

Model 027 Techno Used Tabletop CNC Router Price = $7,500

Techno Used Tabletop CNC Router Price 7,500
     Specifications
  • Travel: X = 21.2" (540mm) Y = 19.6" (500mm) Z = 6.8" (175mm)
  • Gantry Clearance = 7.5" (190mm)
  • Max. speed: 250 in/min
  • Repeatability: .001 inches
  • Precision Ball Screws on all three axes
  • 800 Watt (1 HP) Variable High Speed Spindle only (110V) - 8000 to 24000 rpm, variable
  • Easy to use Techno windows G code CNC interface
  • Aluminum t-slot table
  • Steel Stand Included
  • Also, Includes: 1/8, 1/4 collets, mounting bracket and vacuum shroud
  • *Closed loop DC servo control system, comes complete with Techno servo control card
  • Controls: PC based (*PC not included)
  • Control voltage: (110V), full load amperage = 6.3 amps
  • WARRANTY: 6 months
Techno Refurbished CNC Routers Techno Used CNCs for Sale
Copyright ©  Techno CNC Systems, LLC. All rights reserved.