The Best CNC Routers for Woodworking
Wood design often requires multiple tools and different cut strategies for perfect wood cuts. A variety of woods are used in woodshops, as well. Woodworkers pay close attention to detail so we knew that designing woodworking specific CNC machines would require a tool changer for optimal cut quality and easy tool changes to switch between bits and grooves. Our technicians are very helpful in advising on the appropriate tooling and cut strategies for many different materials involved with woodworking. The Titan and HDS Series are a good fit if you want to cut hard woods because they are equipped with a 12 horsepower HSD brand spindle. This, combined with an all steel construction, allows for aggressive cuts and clean finishes.
Woodshop CNC Machines
CNC machines have been a staple of woodworking for many years now. With the advancement of software, electronics, and machinery, many workshops have been transformed into automated “factories”. Our best CNC routers for woodworking have the ability to work full time, without any extra pay or “over time”, and never call in sick for a day off. These once un-affordable options have become accessible to even small businesses.
The Best
CNC Machines for Woodworkers
Titan Series
- 12HP HSD automatic tool changer
- 8-position tool rack
- Multi-zone vacuum t-slot table
- (3) material pop-up pins
- Brushless AC digital servo drive motors
- Easy to use hand held controller
PRICES STARTING AT
$44,750 – $51,500
Atlas Series
- 4HP HSD collet spindle
- Multi-zone vacuum t-slot table
- Brushless drive motors
- Easy to use and learn hand held controller
PRICES STARTING AT
HD II Tabletop
- 2HP HSD high frequency collet spindle
- Precision ball screws on all three axes
- Vacuum t-slot table
- Easy-to-use handheld controller.
PRICES STARTING AT
Venture Cabinet Nesting
- 12HP HSD automatic tool changer
- 8-position rotary carousel
- 9-spindle drill bank
- Multi-zone double layer high flow vacuum table
- Industrial PC based controller
- Brushless digital AC servo motors and drives
- Pneumatically operated vacuum hoods
- Easy to use Techno CNC Interface
CNC ROUTER
PRICES STARTING AT
Venture Series
- 12 HP automatic tool changer
- Maintenance free brushless AC motors & drives
- 4-zone vacuum t-slot table
- Pneumatic material placement stops
- Hand-held generator with rotary hand wheel controls
- PC with flat screen monitor, keyboard and mouse
- Easy to use Techno CNC interface
- Open architecture works with all industry standard CAD/CAM software
HDS Series
- 12 HP HSD automatic tool changer spindle
- 8-position tool rack
- (3) material pop-up pins
- Multi-zone vacuum t-slot table
- Brushless AC digital servo drive motors
- PC based industrial controller
CNC ROUTER
PRICES STARTING AT
What can our CNC Routers Cut in your Woodshop?
Solid Wood
Cottonwood, Pine, Redwood, Ash, Oak, Beech, Birch, Cherry, Mahogany, Hard maple, Poplar, Teak, Walnut, Hickory, Purple Heart, Leopardwood, Tigerwood, Cocobolo, Bloodwood, Alder, Aspen, Basswood, Beech, Yellow Birch, Cypress, Red Elm, Gum, Hackberry, Pecan, Pacific Coast maple, Red Oak, Sassafras, Sycamore, Black Walnut, White Oak, Willow, African Padauk, Bolivian Rosewood, Hondura Mahogany, Wenge, Spanish Cedar.
Soft Wood
Pine, Soft Maple, Fir, Spruce, Hemlock, Cedar, Redwood.
Foam
EVA, Precision Board, Sign Foam, Polystyrene, Polyethylene, Styra-foam, Polyurethane, Foam Rubber, Silicone Rubber, Urethane.
Non-Ferrous Metals
Composite Wood
OSB, MDF, LDF, Melamine, Particle Board, Plywood, Masonite.
Plastics
ABS, Polycarbonate, Polyethylene, PVC, Polypropylene, Polystyrene, Cast and Extruded Acrylic, HDPE, UHMW, Marine PVC, Lexan, Phenolic, Sintra, Nylon, Lucite, Solid Surface Materials, Luan, PET, Acetate, VHMW, Mica.




































Best Selling Wood CNC Routers
Woodworkers are most interested in our Titan and HDS Series, which are the best CNC routers for woodworking because of their tool changing capabilities. Woodworking often requires multiple tools and different cut strategies. A variety of woods are used and attention to detail/the right cutting tools are a few necessities for woodworking. These two CNC models have become our best selling CNC machines for wood and were specifically designed with these requirements in mind. Our technicians are very helpful in advising on the appropriate tooling and cut strategies for many different materials involved with woodworking. The Titan and HDS Series are a good fit if you want to cut hard woods because they are equipped with a 12 horsepower HSD brand spindle. This, combined with an all steel construction, allows for aggressive cuts and clean finishes. Woodworkers will be glad to know that the machine beds are a combination vacuum table (for vacuum hold down of flat sheets and boards) and aluminum T-slot table (for clamping and fixturing of parts not suitable for vacuum hold down). The Titan and HDS Series machines can be used with a 4th axis rotary table and aggregate tools, which are available for specialized cutting.

-
29 Trade Zone Drive
Ronkonkoma, NY 11779
- 631-648-7481
- technosales@technocnc.com